SAGEMCOM F@ST 2804v2 Reference Manual page 133

Field
Physical LAN Port
Protocol
Differentiated Services
Code Point (DSCP)
Check
Source IP Address
Source Subnet Mask
UDP/TCP source Port
(port or port:port)
Destination IP Address Enter a "Destination" IP address.
SET-1 Destination Subnet
Mask
UDP/TCP Destination
Port
(port or port:port)
Source MAC Address
Source MAC Mask
Destination MAC
Address
Destination MAC Mask
SET-2 802.1p Priority
Sagemcom document. Reproduction and disclosure prohibited
5 - Information / Configuration
Action
Select Blank or the interface of your choice
(ENET(1-4), Wireless or Wireless_Guest) from the
scroll down list.
Select Blank or the protocol of your choice from the
scroll down list (TCP/UDP, TCP, UDP or ICMP).
Select the type of Differentiated Services Code
Point (DSCP) mark to be allocated
(6-bit coding) from the scroll down list.
Default to CS7
See the first table of this chapter.
Enter a "Source" IP address.
Enter a "Source" subnet mask.
Enter a "Source" port or range of ports.
Note: For one port, for example, enter 80. For a
range of ports, enter 80:90.
Enter a "Destination" subnet mask.
Enter a "Destination" port or range of ports.
Note: For one port, for example, enter 80. For a
range of ports, enter 80:90.
Enter a "Source" MAC address.
Enter a "Source" MAC mask.
Enter a "Destination" MAC address.
Enter a "Destination" MAC mask.
Select Blank or a priority value between 0 and 7
from the scroll down list.
Note: 802.1p Priority cannot be selected together
with IP traffic condition.
F@st™ 2804v2 Reference Manual - 253329475-A
: 000000 to 111000
Page 5-97