SAGEMCOM F@ST 2804v2 Reference Manual page 33

1) Configuring as a DHCP client
In Windows XP
•
click Start/Control Panel/Network Connections.
•
right-click
Local Area Connection Properties appears.
•
select the protocol TCP/IP of the network card, and then click the Properties button; the
screen Internet Protocol (TCP/IP) Properties appears.
•
select the general tab, then the case "Obtain an IP address automatically" and the case
"Obtain the addresses of the DNS servers automatically".
•
click the OK button to confirm your choice.
Sagemcom document. Reproduction and disclosure prohibited
the appropriate network,
4 - Configuration of network parameters
and then
F@st™ 2804v2 Reference Manual - 253329475-A
select Properties;
Page 4-3
the