5 - Information / Configuration
5.9.5
Routing
This menu contains 3 sub-menus:
•
Default Gateway (see subsection 5.9.5.1),
•
Static Route (see subsection 5.9.5.2),
•
RIP (see subsection 5.9.5.3).
5.9.5.1
Default Gateway
Object: This menu is used either to allocate dynamically a default gateway address to the
router from a PVC or to enter an address or choose an interface.
•
Select the
Default Gateway
section to display the following screen:
Field
EnableAutomatic Assigned
Default Gateway
Use Default Gateway IP
Address
Use Interface
11
this field only appears when the "Enable Automatic Assigned Default Gateway" field is deactivated (box not
checked).
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-98
sub-menu in the
Check the box to allocate automatically a
default gateway for your router.
Check the box to use a default address.
11
11
Select the interface you want to use from
the scroll down list (pppoe_8_35_1 for
example).
Sagemcom document. Reproduction and disclosure prohibited
Routing
menu in the
Action
Advanced Setup
Default
Box checked
Box checked
Not empty
Box
not checked
Interface
used