SAGEMCOM F@ST 2804v2 Reference Manual page 100

5 - Information / Configuration
Field
VPI/VCI
Connection Type
Service Name
Service Category
IP Address
Service State
NAT
Firewall
IGMP Multicast
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-64
Displays the VPI/VCI specific to the "PPPoE" connection
Displays the "PPPoE" protocol
Displays the name of the service: pppoe_0_35_1
Displays the type of service adapted to the traffic required.
Indicates that the IP address is allocated automatically:
Automaticaly Assigned
Displays the status of the service: Enabled
Displays the status of the NAT: Enabled
Displays the status of the firewall: Enabled
Displays the status of the IGMP function: Disabled
Sagemcom document. Reproduction and disclosure prohibited
Action