SAGEMCOM F@ST 2804v2 Reference Manual page 148

5 - Information / Configuration
Field
Group Name
Grouped Interfaces
Available Interfaces
Used to transfer the interfaces selected in the "Available Interfaces" area to the
"Grouped Interfaces" area.
Used to transfer the interfaces selected in the "Grouped Interfaces" area to the
"Available Interfaces" area.
Field
Automatically Add
Clients with the DHCP
Vendor IDs
Example
If you want to associate the "Video" service with the Ethernet interface:
in the "Group Name" area enter a representative name such as "video_eth".
in the "Available Interfaces" area select ENET4 for the Ethernet interface.
then click on the
in the "Available Interfaces" area select the ATM nas_8_50 interface associated with the
ATM "br_8_50" service ("Bridge" protocol) created earlier using the Advanced Setup / WAN)
menu.
then click on the
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-112
Enter a name which represents the service
you want to associate with a desired interface
(for example "video_eth" if you want to
associate the TV over UP service with the
interface (Ethernet)).
Displays the interfaces associated with a
service you selected in the "Available
Interfaces" area then transferred with the
button.
Lists all your router's interfaces.
Note: Only the "nas_8_50" interface is not
resident on the router. It corresponds
to a "Bridge" ATM interface.
This functionality
connected to a port and to automatically affect this port to it.
To do that, the router receives from this equipment (for
example a decoder TV) a DHCP request which contains a
client specific identification (Vendor ID).
Note: As soon as this assignment is carried out, it becomes
permanent.
button to transfer this interface to the "Grouped Interfaces" area.
button to transfer this interface to the "Grouped Interfaces" area.
Sagemcom document. Reproduction and disclosure prohibited
Meaning
Meaning
allows to recognize
Default
_
_
_
the equipment