SAGEMCOM F@ST 2804v2 Reference Manual page 89

Field
VPI/VCI
Con. ID
Category
Service
Interface
Protocol
Igmp
QoS
State
Note: This function enables the distribution of Multicast datagrams over the local network
(LAN) and interaction between the router and the local network hosts.
Add
•
Click on the Add button to display the following screen:
Sagemcom document. Reproduction and disclosure prohibited
PVC identifier to configure.
Connection Identification. This is used to identify the different
PPP connections which belong to the same PVC. To do so,
you need only increment the "VC number" in the "Service" field
when adding a new "PVC".
ATM type of service
Name of the ATM service. This name is made up as follows:
Protocol_VPI_VCI_Index
For example: pppoe_0_35_1.
Name, allocated automatically, associated with the service
name (for example, ATM interface "ppp_0_35_1" associated
with the ATM service pppoe_0_35_1).
Data flow encapsulation mode.
Status (Enabled or Disabled) of the IGMP function. (see Note).
Status (Enabled or Disabled) of the Quality of Service (QoS).
Status (Enabled or Disabled) of the WAN interface.
F@st™ 2804v2 Reference Manual - 253329475-A
5 - Information / Configuration
Meaning
Page 5-53