SAGEMCOM F@ST 2804v2 Reference Manual page 77

Field
Traffic Class Name
Wireless Transmit Priority In the scroll down list, select the priority you
Protocol
Source IP Address
Source Subnet Mask
UDP/TCP Source Port
(port or port:port)
Destination IP Address
Destination Subnet Mask
UDP/TCP Destination Port
(port or port:port)
Transmission priority
0 - WMM Best Effort (default)
1 - WMM Background
2 - WMM Background
3 - WMM Best Effort
4 - WMM Video priority
5 - WMM Video priority
6 - WMM Voice priority
7 - WMM Voice priority
Click on the
Sagemcom document. Reproduction and disclosure prohibited
Action
Enter a name for the traffic class you want to
create.
want to allocate to the traffic class you
selected (see table below).
Select the appropriate protocol from the scroll
down list (TCP/UDP, TCP, UDP, ICMP).
Enter a Source IP address (LAN).
Enter a sub-net mask associated with the
"Source" IP address.
Enter a "Source" port or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.
Enter a "Destination" IP address (WAN).
Enter a sub-net mask associated with the
"Destination" IP address.
Enter a "Destination" port or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.
This is the lowest priority. This provides no guarantee of
data transmission.
These are intermediate priorities. These provide routing
without too much data flow loss.
This priority provides no guarantee of data transmission.
These are intermediate priorities. They provide a correct
routing for "Video".
These are higher priorities. They provide complete routing
for voice
button to save the parameters.
F@st™ 2804v2 Reference Manual - 253329475-A
5 - Information / Configuration
Meaning
Default
Empty
0 - WMM
Best Effort
(default)
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Page 5-41