SAGEMCOM F@ST 2804v2 Reference Manual page 94

5 - Information / Configuration
Field
PPP IP extension
Use Static IP Address
IP Address:
Configure PPP MTU
Enable PPP Debug mode Check the box to use the PPP Debug mode.
Note: The MTU specifies the maximum size of the data used for packets expressed as a
number of bytes.
•
Click on the Next button to continue configuring the remote network (WAN) in PPPoA
mode.
5
This field only appears when the "Use Static IP Address" field is activated (box checked).
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-58
Check the box to allocate your computer the
public address obtained from the DHCP
server of your Internet Service Provider (ISP).
Your router will then act as a bridge between
the server and your computer.
Check the box to use the static IP address.
5
Enter the static IP address
Enter an MTU (Maximum Transfer Unit) value
between 38 and 1492 (see Note).
In the event of connection failure, this option
will enable you to trace a possible problem in
the SYSLOG file.
Sagemcom document. Reproduction and disclosure prohibited
Action Default
Not checked
Not checked
0.0.0.0
1492
Box
Not checked