Pst; Ppof; Ppog - AMX Modero G4 Instruction Manual

Page Commands (Cont.)

@PST

PAGE

PPOF

PPOG

Modero G4 Touch Panels - Configuration and Programming
Set the show effect time for the specified popup page.
Syntax:
"'@PST-<popup page name>;<show effect time>'"
Variables:
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
show effect time = Given in 1/10ths of a second.
Example:
SEND_COMMAND Panel,"'@PST-Popup1;50'"
Sets the Popup1 show effect time to 5 seconds.
Flips to a page with a specified page name. If the page is currently active, it will not redraw the page.
Syntax:
"'PAGE-<page name>'"
Variable:
page name = 1 - 50 ASCII characters. Name of the page is displayed On. If left blank, the page flips
back to the previous page.
Examples:
SEND_COMMAND Panel,"'PAGE-Page1'"
Flips to page1.
SEND_COMMAND Panel,"'PAGE-'"
Flips to the previous page.
Deactivate a specific popup page on either a specified page or the current page. If the page name is
empty, the current page is used (see example 2). If the popup page is part of a group, the whole group is
deactivated. This command works in the same way as the 'Hide Popup' command in TPDesign4.
Syntax:
"'PPOF-<popup page name>;<page name>'"
Variables:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Examples:
SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
Deactivates the popup page 'Popup1' on the Main page.
SEND_COMMAND Panel,"'PPOF-Popup1'"
Deactivates the popup page 'Popup1' on the current page.
Toggle a specific popup page on either a specified page or the current page. If the page name is empty,
the current page is used (see example 2). Toggling refers to the activating/deactivating (On/Off) of a
popup page. This command works in the same way as the 'Toggle Popup' command in TPDesign4.
Syntax:
"'PPOG-<popup page name>;<page name>'"
Variables:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Examples:
SEND_COMMAND Panel,"'PPOG-Popup1;Main'"
Toggles the popup page 'Popup1' on the Main page from one state to another (On/Off).
SEND_COMMAND Panel,"'PPOG-Popup1'"
Toggles the popup page 'Popup1' on the current page from one state to another (On/Off).
Programming
59