Table of Contents
Advertisement
Programming
SIP Setup Commands (Cont.)
^PHN-SETUP-PASSWORD
^PHN-SETUP-PORT
^PHN-SETUP-PROXYADDR Sets the IP address for the proxy server.
^PHN-SETUP-STUNADDR
^PHN-SETUP-USERNAME
106
Sets the user password for the proxy server.
Syntax:
"'^PHN-SETUP-PASSWORD,<password>'"
Variable:
password = The password for the user name
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PASSWORD,6003'"
Sets the port number for the proxy server.
Syntax:
"'^PHN-SETUP-PORT,<port>'"
Variable:
port = The port for the proxy server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PORT,5060'"
Syntax:
"'^PHN-SETUP-PROXYADDR,<IP>'"
Variable:
IP = The IP address for the proxy server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PROXYADDR,192.168.223.111'"
Sets the IP address for the STUN server.
Syntax:
"'^PHN-SETUP-STUNADDR,<IP>'"
Variable:
IP = The IP address for the STUN server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-STUNADDR,192.168.223.111'"
Sets the user name for authentication with the proxy server.
Syntax:
"'^PHN-SETUP-USERNAME,<username>'"
Variable:
username = The user name (usually the phone extension)
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-USERNAME,6003'"
Modero G4 Touch Panels - Configuration and Programming
Advertisement
Table of Contents
