Pse; Psp; Pst; Ppof - AMX NXD-500i Operation/Reference Manual

Page Commands (Cont.)
@PSE Set the show effect for the specified popup page to the named show effect.
Syntax:
Variable:
Example:
Sets the Popup1 show effect name to 'Slide from Left'.
@PSP Set the show effect position. Only 1 coordinate is ever needed for an effect; however, the command will specify
both.
This command sets the location at which the effect will begin.
Syntax:
Variable:
Example:
Sets the Popup1 show effect x-coordinate value to 100 and the y-coordinate value to 0.

@PST

Set the show effect time for the specified popup page.
Syntax:
Variable:
Example:
Sets the Popup1 show effect time to 5 seconds.
PAGE Flips to a page with a specified page name. If the page is currently active, it will not redraw the page.
Syntax:
Variable:
Example:
Flips to page1.

PPOF

Deactivate a specific popup page on either a specified page or the current page.
• If the page name is empty, the current page is used (see example 2).
• If the popup page is part of a group, the whole group is deactivated.
• This command works in the same way as the 'Hide Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Deactivates the popup page 'Popup1' on the Main page.
Example 2:
Deactivates the popup page 'Popup1' on the current page.
NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom
"'@PSE-<popup page name>;<show effect name>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
show effect name = Refers to the popup effect name being used.
SEND_COMMAND Panel,"'@PSE-Popup1;Slide from Left'"
"'@PSP-<popup page name>;<x coordinate>,<y coordinate>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PSP-Popup1;100,0'"
"'@PST-<popup page name>;<show effect time>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
show effect time = Given in 1/10ths of a second.
SEND_COMMAND Panel,"'@PST-Popup1;50'"
"'PAGE-<page name>'"
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'PAGE-Page1'"
"'PPOF-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
SEND_COMMAND Panel,"'PPOF-Popup1'"
Programming
69