Escape Sequences - AMX Modero G4 Instruction Manual

Escape Sequences

The ^RAF and ^RMF commands support the replacement of any special escape sequences in the filename (specified by
the %F embedded code) with the corresponding data obtained from the system as outlined in the table below:
Escape Sequences
Sequence
$DV
$SY
$IP
$HN
$MC
$ID
$PX
$PY
$ST
For instance, http://www.amx.com/img.asp?device=$DV
would become
http://www.amx.com/img.asp?device=10001.
Modero G4 Touch Panels - Configuration and Programming
Panel Information
Device Number
System Number
IP Address
Host Name
Mac Address
Neuron ID (Only supported on panels that use
ICSNet; ignored on all other panels)
X resolution of current panel mode/file
Y resolution of current panel mode/file
Current state
Sequence Panel Information
$AC Address code
$AP Address port
$CC Channel code
$CP Channel port
$LC Level code
$LP Level port
$BX X Resolution of Current button
$BY Y Resolution of Current button
$BN Name of Button
Programming
99