Bmc - AMX Modero G4 Instruction Manual

"^" Button Commands (Cont.)

^BMC

Modero G4 Touch Panels - Configuration and Programming
Copy attributes of the source button to all the destination buttons. Note that the source is a single
button state. Each state must be copied as a separate command. The <codes> section represents
what attributes will be copied. All codes are 2 char pairs that can be separated by comma, space,
percent or just ran together.
Syntax:
"'^BMC-<vt addr range>,<button states range>,<source port>,<source address>,<source
state>,<codes>'"
Variables:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons, 1 = Off
state and 2 = On state).
• source port = 1 - 100.
• source address = 1 - 4000.
• source state = 1 - 256.
codes:
BM - Picture/Bitmap
BR - Border
CB - Border Color
CF - Fill Color
CT - Text Color
EC - Text effect color
EF - Text effect
FT - Font
IC - Icon
JB - Bitmap alignment
JI - Icon alignment
JT - Text alignment
LN - Lines of video removed
OP - Opacity
SO - Button Sound
TX - Text
VI - Video slot ID
WW - Word wrap on/off
Examples:
SEND_COMMAND Panel,"'^BMC-425,1,1,500,1,BR'"
or
SEND_COMMAND Panel,"'^BMC-425,1,1,500,1,%BR'"
Copies the OFF state border of button with a variable text address of 500 onto the OFF state
border of button with a variable text address of 425.
SEND_COMMAND Panel,"'^BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT'"
Copies the OFF state border, font, Text, bitmap, icon, fill color and text color of the button with a
variable text address of 315 onto the OFF state border, font, Text, bitmap, icon, fill color and text
color of the button with a variable text address of 150.
Note: Use this command if you are using the panel's default color palette. For custom color palettes,
use ^BMF instead.
Programming
67