Table of Contents
Advertisement
Page Commands (Cont.)
@PPX
Close all popups on all pages. This command works in the same way as the 'Clear All' command in TPDesign 4.
Syntax:
Example:
@PSE
Set the show effect for the specified popup page to the named show effect.
Syntax:
Variable:
Example:
@PSP
Set the show effect position. Only 1 coordinate is ever needed for an effect; however, the command will specify both. This
command sets the location at which the effect will begin.
Syntax:
Variable:
Example:
@PST
Set the show effect time for the specified popup page.
Syntax:
Variable:
Example:
PAGE
Flips to a page with a specified page name. If the page is currently active, it will not redraw the page.
Syntax:
Variable:
Example:
PPOF
Deactivate a specific popup page on either a specified page or the current page. If the page name is empty, the current page is
used (see example 2). If the popup page is part of a group, the whole group is deactivated. This command works in the same
way as the 'Hide Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Example 2:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
"'@PPX'"
SEND_COMMAND Panel,"'@PPX'"
Close all popups on all pages.
"'@PSE-<popup page name>;<show effect name>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
show effect name = Refers to the popup effect name being used.
SEND_COMMAND Panel,"'@PSE-Popup1;Slide from Left'"
Sets the Popup1 show effect name to 'Slide from Left'.
"'@PSP-<popup page name>;<x coordinate>,<y coordinate>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PSP-Popup1;100,0'"
Sets the Popup1 show effect x-coordinate value to 100 and the y-coordinate value to 0.
"'@PST-<popup page name>;<show effect time>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
show effect time = Given in 1/10ths of a second.
SEND_COMMAND Panel,"'@PST-Popup1;50'"
Sets the Popup1 show effect time to 5 seconds.
"'PAGE-<page name>'"
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'PAGE-Page1'"
Flips to page1.
"'PPOF-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
Deactivates the popup page 'Popup1' on the Main page.
SEND_COMMAND Panel,"'PPOF-Popup1'"
Deactivates the popup page 'Popup1' on the current page.
Programming
84
Advertisement
Table of Contents
