Table of Contents
Advertisement
Settings Pages
Smart Card
The Smart Card page controls the touch panel's ability to receive and process information from Common Access Card
(CAC) smart card readers.(FIG. 35)
FIG. 35
Smart Card page
Use of this feature requires the use of an AMX-approved CAC reader, as shown below.
Smart Card Page
Smart Card:
Reader Name:
CHUID:
Three CAC readers are approved for use with the Modero touch panels. Each has different methods of displaying the
detection of valid smart cards, but all connect to the touch panel via the touch panel's USB port.
These three models are:
Enabling a Touch Panel To Use a CAC Reader
1.
From the Smart Card page, press the Smart Card button. This enables the panel to receive CAC card information.
2.
Following the manufacturer's instructions, connect the CAC reader to the touch panel via the panel's USB port.
3.
If desired, the touch panel may emit a sound to inform the user that a valid smart card has been detected by the
reader. From the Sounds page (page 10), enable the panel to emit sounds when detecting a smart card, and choose
one of the ten preloaded sounds.
For more information on smart card programming, please refer to the Smart
Cards section on page 121.
When using a CAC reader, please note that different readers have different display standards. For instance, with devices
that have an LED, some light up to show that the device is connected to the touch panel, while others will only light up
upon insertion of a valid smart card. The one certain way to ensure that a CAC reader is working correctly is to look for
the CHUID number in the CHUID field of the Smart Card page. If a user inserts a card into a CAC reader and the
CHUID number is not displayed, either the card is an invalid or damaged smart card, or the CAC reader is not connected
to the touch panel or otherwise damaged.
For further information on using a CAC reader with a Modero touch panel, please refer to the video available at the
AMX Configure channel on YouTube: http://www.youtube.com/user/AMXconfigure.
22
Click this button to enable or disable the touch panel's ability to use smart card readers
Click this button to enable or disable displaying the smart card reader's name and model.
Click this button to enable or disable displaying the card's Card Holder Unique Identifier
(CHUID) number.
SCM Microsystems SCR3310 USB Card Reader
SCM SCR331 USB Common Access CAC Smart Card Reader
SCM SCR3500 Smart Card Reader
Modero G4 Touch Panels - Configuration and Programming
Advertisement
Table of Contents
