Diagnostics - AMX Modero G4 Instruction Manual

If Flash caching is enabled, dynamic images that would have been discarded will actually be moved to Flash, since
retrieving images on Flash is typically faster than across a network, although it is slower than using a RAM cache.
Note that since static images are already stored on Flash, they are never moved to the Flash cache, so Flash caching
applies only to dynamic images. Images in Flash cache are moved back to RAM cache the next time they are viewed. As
the Flash cache approaches its maximum size, the least recently used items may be discarded to make room for new
items.
Cache Settings Page
Image Cache:
Flash Cache Size:
Cache Expires:
Clear Cache:
RAM Size:
RAM Max Size:

Diagnostics

The Diagnostics page (FIG. 65) allows access to panel logs, network statistics, ICSP statistics, and the panel connection
utility.
FIG. 65 Diagnostics page
Diagnostics Page
Logs:
Network Statistics:
ICSP Statistics:
Connection Utility:
Modero G4 Touch Panels - Configuration and Programming
Click this button to enable or disable the image Flash cache.
Use the Up/Down buttons to increase or decrease the total size of the flash memory cache.
The maximum size is displayed in this field.
Use the Up/Down buttons to control the amount of time elapsed before the panel
automatically deletes its cache, with increments of 2 hours, 8 hours, 1 day, 2 days, 5 days,
and "NEVER".
Clears all files previously stored in the flash and RAM memory caches.
Displays the current size of RAM-cached items.
Displays the maximum RAM size for this panel before the least recently used items are
discarded.
Click this button to open the Logs page (page 40).
Click this button to open the Network Statistics page (page 40).
Click this button to open the ICSP Statistics page (page 41).
Click this button to open the Connection Utility page (page 41).
Settings Pages
39