Table of Contents
Advertisement
Programming
Page Commands (Cont.)
PPON
60
Activate a specific popup page to launch on either a specified page or the current page.If the page name
is empty, the current page is used (see example 2). If the popup page is already On, do not re-draw it.
This command works in the same way as the 'Show Popup' command in TPDesign4.
Syntax:
"'PPON-<popup page name>;<page name>'"
Variables:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Examples:
SEND_COMMAND Panel,"'PPON-Popup1; Main'"
Activates the popup page 'Popup1' on the Main page.
SEND_COMMAND Panel,"'PPON-Popup1'"
Activates the popup page 'Popup1' on the current page.
Modero G4 Touch Panels - Configuration and Programming
Advertisement
Table of Contents
