Changing The Device Number; Changing The Device Name - AMX Modero G4 Instruction Manual

Panel Configuration Page
Device Number:
Device Name:
Power Management:
G4 Webcontrol:
Sensors:
Function Show:
Page Tracking:
Synchronize Device Names: Press to synchronize the Device Name, Hostname, and G4 Web Control Names
Telnet/SSH:
Picture View Auto Start:
Camera:

Changing the Device Number

To change the touch panel's Device Number within the network:
1.
From the Panel Configuration page, select the Device Number field. This opens the Device Number keypad
(FIG. 39).
FIG. 39 Device Number keypad
2.
Enter the new device number and press OK.
3.
The Device Number field in the Panel Configuration page will now display the new device number.

Changing the Device Name

To change the name associated with the touch panel:
1.
From the Panel Configuration page, select the Device Name field to open the Device Name keyboard (FIG. 40).
Modero G4 Touch Panels - Configuration and Programming
Press to open a keypad used to view or change the device number of the panel.
Press to open a keyboard used to view or change the device name used for the panel.
Press to open the Power Management page (page 26).
Press to open the G4 Web Control page (page 26).
Press to open the Sensor Settings page (page 27).
When the Function Show feature is displayed, the Channel Port and Code will appear in
yellow, the Address Port and Code in blue, and the Level Port and Channel Code in
purple (FIG. 44).
Press to enable or disable the panel sending page flip tracking to the Master.
(page 29). If this is enabled, only the Device Name can be modified, but this will be
populated to the other names as well.
Press to enable or disable remote access to the panel via Telnet.
Press to allow Picture View to start automatically once the panel detects a suitable USB
stick.
Press to enable or disable camera output.
Note: Disabling camera output will completely disable the camera from being visible on
the touch panel screen and prevent its input from being exported to the MicroUSB port.
Note: This button is not visible on Modero X/S Series G4 panels without a camera
(including portrait wall panels and all "No Comm" panels).
Settings Pages
25