Table of Contents
Advertisement
FIG. 32
System Message: Pairing in progress...
8.
When the pairing is finished, the new device appears on the main Bluetooth page (FIG. 33).
FIG. 33
Detected Bluetooth devices on the Bluetooth page
NFC
The NFC page (FIG. 34) controls the touch panel's Near Field Communications™ (NFC) access, as well as displaying
the last NFC tag read by the device. For more information on the NFC capabilities of your panel, please refer to the
Operation Reference Guide to the panel in question. These Operation Reference Guides are available at www.amx.com.
FIG. 34
NFC page
NFC Page
NFC:
Last Tag Read:
For NFC programming information, refer to the NFC Commands section on
page 118.
The NFC options do not apply to Modero X/S Series G4 panels without NFC
functionality (including all "No Comm" panels).
Modero G4 Touch Panels - Configuration and Programming
Click this button to enable or disable NFC functionality.
Displays the last-read NFC tag ID.
Settings Pages
21
Advertisement
Table of Contents
