File Information - AMX Modero G4 Instruction Manual

File Information

The File Information page (FIG. 8) displays information on the TPDesign4 project file currently loaded on the panel.
FIG. 8 File Information page
File Information Page
Configuration:
Power Up Page:
Inactivity Page:
High Port:
High Access:
High Channel:
High Level:
Startup String:
Wake Up String:
Sleep String:
Shutdown String:
File:
Filename:
Job Name:
Created:
Revised:
Saved:
Dealer ID:
Designer ID:
Sales Order:
Purchase Order:
File Revision:
Blink Rate:
Build Number:
Job Comments:
Modero G4 Touch Panels - Configuration and Programming
This section contains information on the panel's configuration.
Displays the page assigned to display after the panel is powered-up.
Displays the page assigned to display when the panel is in Sleep Mode.
Displays the high port (port count) value for the panel.
Displays the high access (access count) value for the panel.
Displays the high channel (channel count) value for the panel.
Displays the high level (level count) value being used by the panel.
Displays the start-up string.
Displays the wake up string used after an activation from a timeout.
Displays the sleep string used during a panel's Sleep mode.
Displays the shutdown string used during a panel's Shutdown mode.
This section contains information on the particular TPDesign4 file used by the panel.
Displays the name of the TPDesign4 file currently being used for the panel.
Displays the job name.
The creation date of the project.
Displays the last revision date for the project.
Displays the last save date on the project.
Displays the dealer ID number (unique to every dealer and entered in TPD4).
Displays the designer information.
Displays the sales order information.
Displays the purchase order information.
Displays the revision number of the TPDesign4 file, if applicable.
Displays the feedback blink rate, in 5-second increments.
Displays the build number information of the TPD4 software used to create the project file.
Displays any comments associated to the job (from the TPD4 project file).
Settings Pages
7