Breakout Box; Configuring The Touch Panel - AMX Modero G4 Instruction Manual

Breakout Box

Use the Breakout Box page to configure the touch panel to receive signals from a MXA-MP Multi Preview or MXA-
MPL Multi Preview Live devices for video stream display.
If a Breakout Box is not connected to the panel's network, all fields but the Breakout Box button will be empty.
For more information on operation and configuration of an MXA-MP or MXA-MPL, refer to the MXA-MP/MPL
Operation Reference Guide, available at www.amx.com.
FIG. 36 Breakout Box page
Breakout Box Page
Breakout Box:
Version:
Serial Number:
MAC Address:
Input Information:
Stream Information:

Configuring the Touch Panel

1.
From the Breakout Box page, press the Breakout Box button to enable the panel to receive information from the
Breakout Box.
2.
If the device is connected, the remaining information on the Breakout Box page will self-populate as the panel
receives that information from the Breakout Box.
If the device is not connected to the touch panel at this time, any attempts at enabling
the device will fail, and the Breakout Box page will be blank other than the Breakout
Box button.
If an MXA-MP or MPL is not connected to the touch panel, the Breakout Box button
MUST be disabled to prevent network conflicts.
Modero G4 Touch Panels - Configuration and Programming
Click this button to enable the touch panel to receive information from the device.
Displays the current firmware version on the Breakout Box.
Displays the serial number of the Breakout Box.
Displays the MAC address of the Breakout Box.
Displays the video format and resolution coming from the video input port.
This feature is currently disabled.
Settings Pages
23