Saving Changed Settings; Settings - AMX Modero G4 Instruction Manual

Saving Changed Settings

Changes to the Settings pages are made to the device's Flash memory, and may not be saved immediately to the panel in
the case of sudden power loss. To ensure that your changes are retained, always make sure to shut down the device from
the main Settings page (page 5). In situations of sudden power loss, the panel may boot up at its next use with only
previously saved settings, requiring resetting all of those settings to their new values.
Modero X and S Series touch panels should always be shut down or rebooted by the
Settings pages. Turning off a touch panel by removing power may cause damage to
the touch panel's flash memory.

Settings

The Settings page (FIG. 6) controls access to all other Settings pages.
FIG. 6 Settings page
Settings Page
Status:
Display:
Sounds:
Date & Time:
Connection & Networks Select this to go to the Connection & Networks page (page 13). If the lock icon is closed, you
Configuration:
The Connection & Networks and Configuration pages are password-protected. To open either of these pages:
1.
Select the appropriate page from the Settings page.
2.
In the Password keypad, enter the password and select OK. The default password is 1988.
Modero G4 Touch Panels - Configuration and Programming
Select this to go to the Status page (page 6).
Select this to go to the Display page (page 8)
Select this to go to the Sounds page (page 10).
Select this to go to the Date & Time page (page 12).
will need the correct password to access this section.
Select this to go to the Configuration page (page 24). If the lock icon is closed, you will need
the correct password to access this section.
Settings Pages
5