Psp; Pst; Ppof; Ppog - AMX MST-1001 Configuration Manual

Page Commands (Cont.)

@PSP

Set the show effect position. Only 1 coordinate is ever needed for an effect; however, the command will specify both. This
command sets the location at which the effect will begin.
• Syntax:
"'@PSP-<popup page name>;<x coordinate>,<y coordinate>'"
• Variables:
• Example:
SEND_COMMAND Panel,"'@PSP-Popup1;100,0'"

@PST

Set the show effect time for the specified popup page.
• Syntax:
"'@PST-<popup page name>;<show effect time>'"
• Variables:
• Example:
SEND_COMMAND Panel,"'@PST-Popup1;50'"
PAGE Flips to a page with a specified page name. If the page is currently active, it will not redraw the page.
• Syntax:
"'PAGE-<page name>'"
• Variables:
• Example:
SEND_COMMAND Panel,"'PAGE-Page1'"
SEND_COMMAND Panel,"'PAGE-'"

PPOF

Deactivate a specific popup page on either a specified page or the current page. If the page name is empty, the current page is
used (see example 2). If the popup page is part of a group, the whole group is deactivated. This command works in the same way
as the 'Hide Popup' command in TPDesign4.
• Syntax:
"'PPOF-<popup page name>;<page name>'"
• Variables:
• Example:
SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
• Example:
SEND_COMMAND Panel,"'PPOF-Popup1'"

PPOG

Toggle a specific popup page on either a specified page or the current page. If the page name is empty, the current page is used
(see example 2). Toggling refers to the activating/deactivating (On/Off) of a popup page. This command works in the same way as
the 'Toggle Popup' command in TPDesign4.
• Syntax:
"'PPOG-<popup page name>;<page name>'"
• Variables:
• Example:
SEND_COMMAND Panel,"'PPOG-Popup1;Main'"
• Example:
SEND_COMMAND Panel,"'PPOG-Popup1'"
Modero S Series Touch Panels - Configuration & Programming Manual
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Sets the Popup1 show effect x-coordinate value to 100 and the y-coordinate value to 0.
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
show effect time = Given in 1/10ths of a second.
Sets the Popup1 show effect time to 5 seconds.
page name = 1 - 50 ASCII characters. Name of the page is displayed On. If left blank, the page flips back to the previous page.
Flips to page1.
Flips to the previous page.
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Deactivates the popup page 'Popup1' on the Main page.
Deactivates the popup page 'Popup1' on the current page.
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Toggles the popup page 'Popup1' on the Main page from one state to another (On/Off).
Toggles the popup page 'Popup1' on the current page from one state to another (On/Off).
Programming
48