AMX Modero G4 Instruction Manual page 63

FIG. 76 Command Output Loopback Port
If you wish to embed commands in a button, these are done through the Command Output Loopback Port. This may be
found in the Button Properties window, under the Programming tab. Click the "..." button to open the Button Command
Output window (FIG. 77).
FIG. 77 Button Command Output popup window
In the above example, the commands added to the Button Command Output window hide the video window, resize the
window, set the video mode to HDMI at 640x480@30 Hz, and show the video window.
When using the MXA-MPL for displaying live motion streams, make sure to use the
supported resolutions with the video input type. While the MXA-MPL is capable of
supporting up to 60 Hz, the Modero X display panels that use MXA-MPL only support
25-30 Hz.
Modero G4 Touch Panels - Configuration and Programming
MXA-MP and MXA-MPL Programming
53