I Operating Band Selection - Icom IC-E91 Instruction Manual

4
FREQUENCY AND CHANNEL SETTING
D D Call/TV* channels
Call channels are used for quick recall of most-often used fre-
quencies.
*Appears only when TV channels are programmed via the
optional RS-91. Also available for A band operation only.
qPush [CALL] several times to select call channels/TV
channels (A band only).
• Call/TV channels can be selected in sequence.
w Rotate [DIAL] to select the desired channel.
[DIAL]
16
• Call channel indication
145 000
25
C0 C0
µ
• TV channel indication
10 ch
25
µ TV TV

I Operating band selection

The transceiver can receive the AM broadcast, HF bands,
50 MHz, FM broadcast, VHF air, 144 MHz, 300 MHz,
400 MHz or 800 MHz* bands.
for B band operation. See next page for details.
➥ In VFO mode, push [BAND] several times to select the de-
sired frequency band.
• If the other than VFO mode is selected, such as a memory chan-
nel/call channel/TV channel, push [VFO] to select VFO mode
first, then push [BAND] to select the desired band.
➥ While pushing and holding [BAND], rotating [DIAL] also
selects frequency band.
[DIAL]
Available frequency bands are different depending on ver-
sion. See the specification for details. (pgs. 119, 120)
*Some frequency ranges are blocked accordinto trans-
ceiver version.
(Some bands are not selectable
)
145 000
25
µ 000 000