Operating Band Selection - Icom IC-92AD Instruction Manual

4
FREQUENCY AND CHANNEL SETTING
D Call/TV*/Weather
Call channels are used for quick recall of most-often used
frequencies.
* Appears only when TV channels are programmed via the
optional RS-92. Also available for A band operation only.
†
Available for the U.S.A. version only.
q Push [CALL] several times to select call channels/TV
channels (A band only)/Weather channels.
• Call/TV/Weather channels can be selected in sequence.
w Rotate [DIAL] to select the desired channel.
[DIAL]
CALL
RX CS
16
†
channels
• Call channel indication
+DUP +DUP DTCS DTCS
FM FM PRIO WX PRIO WX EMR EMR
145 000 14 000
A
MemoName MemoName
P SKIP SKIP
µ C0 C0
LOW LOW
ATT ATT
• TV channel indication
+DUP +DUP DTCS DTCS
C
WFM WFM PRIO WX PRIO WX EMR EMR
10 ch ch
25 25
A
MemoName MemoName
P SKIP SKIP
µ TV TV
LOW LOW
ATT ATT
• Weather channel indication
+DUP +DUP DTCS DTCS
PRIO PRIO WX WX EMR EMR
1 ch ch
25 25
A
MemoName MemoName
P SKIP SKIP
WX WX
µ
LOW LOW
ATT ATT

■ Operating band selection

The transceiver can receive the AM broadcast, HF bands,
50 MHz, FM broadcast, VHF air, 144 MHz, 300 MHz, 400
MHz or 800 MHz* bands.
(Some bands are not selectable for B
band operation. See next page for details.
➥ In VFO mode, push [BAND] several times to select the
desired frequency band.
• If VFO mode is not selected, such as a memory channel/call
channel/TV channel/Weather channel, push [VFO] to select
VFO mode fi rst, then push [BAND] to select the desired band.
➥ While pushing and holding [BAND], rotating [DIAL] also
selects the frequency band.
[DIAL]
D
BAND
Available frequency bands are different depending on ver-
sion. See the specifi cation for details. (pgs. 135, 136)
* Some frequency ranges are blocked for the U.S.A. ver-
sion by regulation.
)
+DUP +DUP DTCS DTCS
FM FM PRIO PRIO WX WX EMR EMR
14 145 000 000
A
MemoName MemoName
PSKIP PSKIP
µ 000 000
LOW LOW
ATT ATT