I Mode Selection - Icom IC-91A Instruction Manual

I Mode selection

D D VFO mode
VFO mode is used for the desired frequency setting within the
frequency coverage.
➥ Push [VFO/MHz] to select VFO mode.
What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator. Fre-
quencies for both transmitting and receiving are generated
and controlled by the VFO.
• VFO mode indication
+DUP +DUP DTCS DTCS
FM FM PRIO PRIO WX WX EMR EMR
146 010
25
A
MemoName MemoName
P SKIP
µ 000 000
LOW LOW
ATT ATT
FREQUENCY AND CHANNEL SETTING
D D Memory mode
Memory mode is used for operation of memory channels
which have programmed frequencies.
q Push [MR/S.MW] to select memory mode.
• "µ µ
" appears when memory mode is selected.
w Rotate [DIAL] to select the desired memory channel.
• Only programmed memory channels can be selected.
• Direct memory channel entering selects the desired memory
channel. (p. 64)
• See p. 66 for memory programming details.
4
• Memory mode indication
+DUP +DUP DTCS DTCS
FM FM PRIO PRIO WX WX EMR EMR
146 010
25
A
MemoName
P SKIP
µ 000 000
LOW LOW
ATT ATT
Appear
4
15