Cordless Headset Description - AT&T SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Cordless Headset Description

The registration process described in the manual that comes with the Cordless
Headset is not appropriate for the Deskset, which requires a different process.
The correct process is described in
(SB67025 Only)" on page
1. ON/OFF
2. VOLUME +/– Press the volume key on the side of the headset to adjust the
3. MUTE/FLASH Press to mute the microphone during a call. The headset beeps
4. Battery Cover Open to install or replace the battery.
5. Earpiece
Overview
"Registering an Optional Cordless Headset
102.
1
Figure 10. TL7600 Cordless Headset Features
Press to make or answer a call, and to end a call.
The light is on when the headset is charging in the headset charger.
The light flashes slowly when you are on a call and flashes quickly
when there is an incoming call.
NOTE: To answer a call while you are already on a call, press ON/
The first call is dropped. Press ON/
listening volume when on a call.
every 10 seconds while the microphone is muted.
Press to mute the ringtone in the earpiece when there is an
incoming call.
The headset FLASH feature does not operate with the SB67025
Deskset.
When you receive calls, the headset earpiece plays a ringtone. The
headset does not have an external ringer.
24
Back to Contents
5
2
3
4
to answer the next call.
OFF
.
OFF