Chapter 9
Advanced Copy Settings
9.1
Advanced Copy Basic Settings
1
Click the [Advanced Copy] tab on the navigation of the ETERNUS Web GUI screen. Then, click [Setting]
in [Category].
2
In [Action] on the [Setting] screen, click [Modify EC/OPC Priority].
3
Set the required items and click the [Set] button.
Resolution
•
Select the resolution. Specify "´64" in this example.
Table Size (MB)
•
Specify the copy table size. Specify "128 (MB)" in this example.
•
Table Size Threshold
Select the threshold for the table size usage rate.
To send notification automatically when the usage rate exceeds the threshold, enable notification in
"6.1 Event Notification Setup" (page 81)
Syslog).
4
In the confirmation screen, click the [OK] button.
Copy table size setting starts.
5
In the setting completion screen, click the [Done] button.
The screen display returns to the [Setting (Advanced Copy)] screen.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
and specify the notification method (email, SNMP, trap, or
139
P3AM-9002-01ENZ0