Volume Creation - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 5 Expansion Functions
5.4 Adding Servers
When "Manual" is selected, the settings for "Manual Setting" are displayed.
4
Set the required items and click the [Create] button. A confirmation screen appears.
5
Click the [OK] button.
The RAID group is registered and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [RAID Groups] screen.
5.4.2

Volume Creation

Create volumes in the RAID group. The procedure to create a volume is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volumes] screen appears.
2
In [Action], click [Create].
The [Create Volumes] screen appears.
3
Select "Automatic" or "Manual" for "RAID Group / TPP Selection".
4
Enter the name of the volume that is to be created in "Name", set the required items, and click the
[Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The volume is created and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [Volumes] screen.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
97
Copyright 2014 FUJITSU LIMITED
P3AM-7662-04ENZ0