Fujitsu ETERNUS DX60 S3 Configuration Manual page 83

Chapter 6 Monitoring Settings
6.2 Various Notification Settings
The following procedure shows an example when selecting the [IPv4 Settings] tab.
2
Set up the SNMP environment.
(1)
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
(2)
In [Category], click [Network].
The [Network] screen appears.
(3)
In [Action], click [Setup SNMP Interface].
The [Setup SNMP Agent Basic Interface] screen appears.
(4)
Select [Enable] for [SNMP Function], set the required items, and click the [Set] button.
Select the LAN port that was set up in
A confirmation screen appears.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Step 1 for "LAN Port used for SNMP".
83
P3AM-9002-01ENZ0