Fujitsu ETERNUS DX60 S3 Configuration Manual page 70

Chapter 5 General Settings
5.6 Firewall Settings
5
In the [Setup Firewall] screen, specify whether to enable/disable each service.
To enable a service, select the checkbox for that service.
• HTTP/HTTPS
This service is enabled when an ETERNUS DX is connected via ETERNUS Web GUI.
Data is encrypted and transferred for HTTPS.
Telnet/SSH
•
This service is enabled when an ETERNUS DX is connected via ETERNUS CLI.
Data is encrypted and transferred for Secure SHell (SSH).
ICMP
•
This service is enabled when an ICMP connection is allowed.
Maintenance-Secure
•
This service is enabled for connections from things such as monitoring software or for using the re-
mote support function to download firmware between storage systems.
SSH encrypts and sends/receives data.
• SNMP
This service is enabled when an ETERNUS DX is connected via the SNMP manager.
• ETERNUS DX Discovery
Change the setting to "Disable".
6
Click the [Set] button.
7
In the confirmation screen, click the [OK] button.
The firewall settings are applied.
8
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
70
P3AM-9002-01ENZ0