Ca Reset Group Settings - Fujitsu ETERNUS DX60 S3 Configuration Manual

Disk storage system
Hide thumbs Also See for ETERNUS DX60 S3:
Table of Contents

Advertisement

Chapter 8
SAN Connection Settings
8.1
Connection Settings for the ETERNUS DX
6
Click the [Done] button.
The screen display returns to the [Connectivity] screen.
8.1.3

CA Reset Group Settings

All the ports are configured to be members of one CA reset group in the initial setting.
In consideration of the range affected by inaccessible port, this function can be used to create CA reset group
on only a specific port and change the member ports of an existing CA reset group.
For normal operations, the setting does not need to be changed. For the servers that require CA reset group
to be set, refer to "Configuration Guide -Server Connection-" for each OS.
1
Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen. On the [Connectivity]
screen, click [CA Reset Group] in [Category].
2
Select the CA reset group to be set. In [Action], click [Set Reset Group].
All the ports are configured in one reset group in the initial setting.
3
Set the CA reset group member ports and click the [Modify] button.
4
In the confirmation screen, click the [OK] button.
5
Click the [Done] button to return to the [CA Reset Group] screen.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
114
P3AM-9002-01ENZ0

Advertisement

Table of Contents
loading

Table of Contents