Fujitsu ETERNUS DX60 S3 Configuration Manual page 48

Chapter 4 Connecting Cables
4.2 Drive Enclosure Connection
When connecting the mini SAS HD cable between enclosures, check the direction of the connector (the tab
must be pointed downward) and firmly insert all the way in.
To disconnect the mini SAS HD cable between enclosures, hold the tab and then pull out the connector.
1
Check the connection destination of the mini SAS HD cables between enclosures.
The connectors on the cable with the "n" symbol are connected to the DI (OUT) ports on the controller
•
enclosure.
• The connectors on the cable with the "l" symbol are connected to the DI (IN) ports on the drive en-
closure.
Tab
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
48
P3AM-9002-01ENZ0