Drive Enclosure (3.5" Type); Front; Rear; Figure 1.5 Front View Of A Drive Enclosure - Fujitsu ETERNUS DX60 S3 Configuration Manual

Chapter 1 Component Names
1.2

Drive Enclosure (3.5" Type)

1.2 Drive Enclosure (3.5" Type)
Drives and an operation panel are installed in the front of the drive enclosure. I/O modules and power supply
units are installed in the rear.
1.2.1

Front

This section provides the names of the components in the front of a drive enclosure.

Figure 1.5 Front View of a Drive Enclosure

1 2
3
1. Operation panel
2. 3.5" drive
3. Flange cover
1.2.2

Rear

This section provides the names of the components in the rear of a drive enclosure.
When only one I/O module is installed
•

Figure 1.6 Rear View of a Drive Enclosure (When Only One I/O Module is Installed)

3
1. I/O module (IOM#0)
2. Cover
3. Drive interface (IN) port
4. Drive interface (OUT) port
5. Power supply unit (PSU#0)
1
4
5
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
2
6
21
3
P3AM-9002-01ENZ0