Power Distribution Units (For Regions Other Than Emea&I); Power Distribution Units (1U); Figure 1.7 Rear View Of A Drive Enclosure (When Two I/O Modules Are Installed); Figure 1.8 Power Distribution Unit (Ac200-240V, 1U, 4 Outlets) - Fujitsu ETERNUS DX60 S3 Configuration Manual

Chapter 1 Component Names
1.3 Power Distribution Units (for Regions Other than EMEA&I)
6. Power supply unit (PSU#1)
When two I/O modules are installed
•

Figure 1.7 Rear View of a Drive Enclosure (When Two I/O Modules are Installed)

1
3
1. I/O module (IOM#0)
2. I/O module (IOM#1)
3. Drive interface (IN) port
4. Drive interface (OUT) port
5. Power supply unit (PSU#0)
6. Power supply unit (PSU#1)
1.3 Power Distribution Units (for Regions Other than EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
1.3.1

Power Distribution Units (1U)

The 1U power distribution unit has four outlets and two inlets.
1.3.1.1 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)

Figure 1.8 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)

1. Main line switch
2. Outlet (OUTPUT)
3. Inlet (INPUT)
4
5
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
2
3 4
6
1
2
3
22
P3AM-9002-01ENZ0