Fujitsu ETERNUS DX60 S3 Configuration Manual page 54

Chapter 4 Connecting Cables
4.4 Power Cord Connection
3
Use the power cord clamps to prevent the power plugs from coming unplugged.
Attach the power cord clamps removed in
4
Connect the plugs on the other end of the power cords (AC input cables) that are attached to the power
distribution unit to sockets.
Power supply failure can be prevented by connecting the power cords (AC input cables) on the power
distribution unit #0 side and the power distribution unit #1 side to different power sources.
Power
distribution
unit#1
Power
distribution
unit#0
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Step 1.
AC input cables
Connect to power outlets.
54
P3AM-9002-01ENZ0