Chapter 11
Solution Configuration
11.1
Green
Figure 11.1 Solution — Green
■
Configuration Procedure
Perform the required settings for Eco-mode. These settings can be performed with either ETERNUS SF Storage
Cruiser or ETERNUS Web GUI.
To set the visualization of power consumption and temperature, use ETERNUS SF Storage Cruiser. ETERNUS SF
Storage Cruiser obtains power consumption of the ETERNUS DX for "power consumption" and ambient tem-
perature (intake air temperature for the fans) for "temperature".
●
Required Environment
ETERNUS SF Storage Cruiser is required to visualize (graphically display) the power consumption and temper-
ature.
●
Configuration Procedure
Eco-mode
Perform the following settings with the operation management server (ETERNUS SF Storage Cruiser) or ETER-
NUS Web GUI:
Eco-mode setup
•
Enable the Eco-mode for the ETERNUS DX.
Collects power consumption
and temperature data
for each storage system
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
During operation
Business drives
Backup drives
Stopped Stopped Stopped Stopped Stopped
During backup
Business drives
Backup drives
ETERNUS DX
Server
ETERNUS SF
Storage Cruiser
153
Backup volume
operation
12
PM
Off
Operates
for only four hours
12
On
AM
4
Off
P3AM-9002-01ENZ0