Fujitsu ETERNUS DX60 S3 Configuration Manual page 158

Chapter 11 Solution Configuration
11.2 Virtualization Platform
■
Configuration Procedure
Install any plug-ins that are required for function linkage and perform the necessary settings.
●
Required Environment
For linkage with System Center 2012, no plug-ins are required.
●
Configuration Procedure
SCVMM2012
Use ETERNUS Web GUI to enable the SMI-S settings in the ETERNUS DX.
If the management console for SCVMM2012 uses a different subnet, add the subnet to [Allowed IP List] in
[Set Network Environment].
When Windows Server 2012 is installed in the Hyper-V server, the ODX function is available for data copying.
Create ODX volumes after enabling the ODX settings for the Advanced Copy function in the ETERNUS DX with
ETERNUS Web GUI.
For details on the SCVMM2012 settings, refer to the manual of the SCVMM2012.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
158
P3AM-9002-01ENZ0