Chapter 8
SAN Connection Settings
8.2
Server Connection Setup
3
Specify the capacity in [Specify Volume Size], and click the [Next] button.
Set the capacity assuming "LUN size = drive size" for this example.
4
When [Assign Drive Letter or Path] appears, assign a drive letter and click the [Next] button.
Perform the settings as shown below.
Drive
F
File system
that is to be
LUN
created
NTFS
0
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Volume No.
Volume name
0
main
131
Type
Capacity
Standard
1TB
P3AM-9002-01ENZ0