Fujitsu ETERNUS DX60 S3 Configuration Manual page 74

Chapter 5 General Settings
5.7 RAID Configuration Settings
The procedure to create an operation volume is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volume] screen appears.
2
In [Action], click [Create].
The [Create Volume] screen appears.
3
Set the required items in the [Create Volume] screen and click the [Create] button.
Name: main
Capacity: 1TB
Type: Standard
RAID Group / TPP Selection: Manual
Manual Setting: RG0
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen display returns to the [Volume] screen.
6
Then, create SDV and SDPV in the backup RAID group (RG1).
For the creation procedure, refer to
and "5.7.4 Copy Data Destination Volume (SDPV) Creation" (page
"5.7.3 Generation Management Volume (SDV) Creation" (page 75)
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
76).
74
P3AM-9002-01ENZ0