Fujitsu ETERNUS DX60 S3 Configuration Manual page 122

Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
17
On the [iSCSI Initiator Properties] screen, confirm that [Status] has changed to [Connected].
18
In the same way, repeat
Initiator IP: IP address of the server (B in
Target portal IP: IP address of the ETERNUS DX (D in
Step 11 and later steps for the other target.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Figure 8.1)
Figure 8.1)
122
P3AM-9002-01ENZ0