Throttle Valve Disassembly; Carburetor Removal - KYMCO Zing 125 Service Manual

4
. FUEL SYSTEM

THROTTLE VALVE DISASSEMBLY

Remove the right side cover.
Remove the carburetor cap.
Pull out the throttle valve.
Disconnect the throttle valve and remove the
spring from the carburetor cap.
Pry off the needle retainer and remove the jet
needle.
Check the throttle valve and jet needle for
wear or damage.

CARBURETOR REMOVAL

Loosen the drain screw to drain the gasoline
from the float chamber.
＊ ＊ ＊ ＊
• Keep sparks and flames away from the
work area.
• Drain gasoline into a clean container.
Disconnect the fuel inlet tube and air cut-off
valve (A.C.V.) tubes.
4-3
Carburetor Cap
Throttle Valve
Drain Screw
Throttle Cable
Right side cover
Throttle Cable
Needle Retainer
Jet Needle