Table of Contents
Advertisement
15
Domain Name Service
Configuring General
DNS Service
Parameters
IP Services
This chapter describes how to configure Domain Name Service (DNS) on this
switch. For information on DHCP snooping which is included in this folder, see
"DHCP Snooping" on page
This chapter provides information on the following IP services, including:
◆
DNS
– Configures default domain names, identifies servers to use for dynamic
lookup, and shows how to configure static entries.
◆
Multicast DNS
– Configures multicast DNS host name-to-address mapping on
the local network without the need for a dedicated DNS server.
◆
DHCP Client
– Specifies the DHCP client identifier for an interface.
◆
DHCP Relay Option 82
including DHCP option 82 information.
DNS service on this switch allows host names to be mapped to IP addresses using
static table entries or by redirection to other name servers on the network. When a
client device designates this switch as a DNS server, the client will attempt to
resolve host names into IP addresses by forwarding DNS queries to the switch, and
waiting for a response.
You can manually configure entries in the DNS table used for mapping domain
names to IP addresses, configure default domain names, or specify one or more
name servers to use for domain name to address translation.
Use the IP Service > DNS - General (Configure Global) page to enable domain
lookup and set the default domain name.
Command Usage
◆
To enable DNS service on this switch, enable domain lookup status, and
configure one or more name servers (see
on page
456).
346.
– Enables DHCP relay service for attached host devices,
"Configuring a List of Name Servers"
– 453 –
Advertisement
Table of Contents
