Email To User; Figure 34: Email To User: Prompt Information - Grandstream Networks UCM6510 IP PBX User Manual


Delete and Recreate: The current extension previously configured will be deleted and the
duplicate extension in the csv file will be loaded to the PBX.

Update Information: The current extension previously configured in the PBX will be kept.
However, if the duplicate extension in the csv file has different configuration for any options, it will
override the configuration for those options in the extension.
5. Click on to select csv file from local directory in the PC for uploading.
6. Click on "Save" to import the csv file.
7. Click on "Apply Changes" to apply the imported file on the UCM6510.

EMAIL TO USER

Once the extensions are created with Email address, the PBX administrator can click on button "Email To
User" to send the registration and configuration information for this account to the user who is going to
register and use this extension. Please make sure Email setting under web UI->Settings->Email
Settings is properly configured and tested on the UCM6510 before using "Email To User".
When click on "Email To User" button, the following message will be prompted in the web page. Click on
OK to confirm sending the account information to all users' Email addresses.
The user will receive Email including account registration information and LDAP configuration. A QR code
is also generated for the text information.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 34: Email To User: Prompt Information

UCM6510 IP PBX User Manual Page 80 of 229