Table 3: Lcd Menu Options - Grandstream Networks UCM6510 IP PBX User Manual

The following table shows the LCD menu options.
View Events
Device Info
Network Info
Network Menu
Factory Menu
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Table 3: LCD Menu Options


Critical Events

Other Events

Hardware: Hardware version number

Software: Software version number

P/N: Part number

WAN MAC: WAN side MAC address

LAN MAC: LAN side MAC address

Uptime: System up time since the last reboot

WAN Mode: DHCP, Static IP, or PPPoE

WAN IP: IP address

WAN Subnet Mask

LAN IP: IP address

LAN Subnet Mask

WAN Mode: Select WAN mode as DHCP, Static IP or PPPoE

Static Routes Reset: Click to reset the static route setting

Reboot

Factory Reset

LCD Test Patterns
Press "OK" to start. Then press "Down" button to test different LCD
patterns. When done, press "OK" button to exit.

Fan Mode
Select "Auto" or "On".

LED Test Patterns
Select "All On" "All Off" or "Blinking" and check LED status for USB, SD,
T1/E1, Phone 1/Phone 2, Line 1/Line 2 ports. After the LED test, select
"Back" in the menu and the device will show the LED actual status again.

RTC Test Patterns
Select "2022-02-22 22:22" or "2011-01-11 11:11" to start the RTC (Real-
Time Clock) test pattern. Check the system time from LCD idle screen by
pressing "DOWN" button, or from web GUI->System Status->General
page. After the test, reboot the device manually and the device will display
UCM6510 IP PBX User Manual Page 22 of 229