Grandstream Networks UCM6510 IP PBX User Manual page 66

Call Forward Unconditional
Call Forward No Answer
Call Forward Busy
Ring Timeout
Auto Record
Skip Voicemail Password
Verification
Support Hot-Desking Mode
User Settings
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
generated password for security purpose.
Configure the Call Forward Unconditional target number so that the
incoming call to this extension will be always forwarded to the target
number. If not configured, the Call Forward Unconditional feature is
deactivated. The default setting is deactivated.
Configure the Call Forward No Answer target number so that the
incoming call to this extension will be forwarded to the target number if
the call is not answered until the ringing times out. If not configured, the
Call Forward No Answer feature is deactivated. The default setting is
deactivated.
Configure the Call Forward Busy target number so that the incoming call
to this extension will be forwarded to the target number if the call is
rejected or the extension is in talking/busy status. If not configured, the
Call Forward Busy feature is deactivated. The default setting is
deactivated.
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6510, which can be configured in the global ring timeout setting
under web GUI->Internal Options: General Preference. The valid range
is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout
used is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files will be saved in external storage if
plugged in and can be accessed under web GUI->CDR->Recording
Files.
When user dials voicemail code, the password verification IVR is skipped.
If enabled, this would allow one-button voicemail access. By default this
option is disabled.
This mode can be used for devices that support hot-desking feature. For
example, the GXP21xx series phones support hot-desking feature by
turning on "Public Mode". On the device, users can log in and log out
using the SIP UserID and password. If enabled on the UCM6510, the SIP
Password for the extension will accept only alphabet characters and
digits; AuthID will also be changed to the same as Extension.
UCM6510 IP PBX User Manual Page 64 of 229