Provisioning; Overview; Auto Provisioning - Grandstream Networks UCM6510 IP PBX User Manual

OVERVIEW

Grandstream SIP Devices can be configured via web interface as well as via configuration file through
TFTP/HTTP/HTTPS download. All Grandstream SIP devices support a proprietary binary format
configuration file and XML format configuration file. The UCM6510 provides a Plug and Play mechanism
to auto-provision the Grandstream SIP devices in a zero configuration manner by generating XML config
file and having the phone to download it within LAN area. This allows users to finish the installation with
ease and start using the SIP devices in a managed way.
To provision a phone, three steps are involved, i.e., discovery, assignment and provisioning. The
UCM6510 creates XML config file to the detected/assigned Grandstream device and accomplishes the
following configurations on the device after the provisioning:

A UCM6510 extension will be assigned and registered on the phone.

SIP-related network settings such as "NAT traversal" and "Use Random Port" are configured on the
phone.

Call feature settings such as "Public Mode", "Voicemail User ID", "Dial Plan" and "Auto Answer".

LDAP client configurations will be set up automatically on the phone to use the default LDAP directory
generated in the UCM6510 LDAP server.
This section explains how zero config works on the UCM6510. The settings for this feature can be
accessed via web GUI->PBX->Basic/Call Routes->Zero Config.

AUTO PROVISIONING

By default, the Zero Config feature is enabled on the UCM6510 for auto provisioning. Three methods of
auto provisioning are used.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

PROVISIONING

UCM6510 IP PBX User Manual Page 57 of 229