Grandstream Networks UCM6510 IP PBX User Manual page 67

First Name
Last Name
Email Address
Language
SIP Settings
NAT
Can Reinvite
DTMF Mode
Insecure
Enable Keep-alive
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Configure the first name of the user. The first name can contain
characters, letters, digits and _.
Configure the last name of the user. The last name can contain
characters, letters, digits and _.
Fill in the Email address for the user. Voicemail will be sent to this Email
address.
Select the voice prompt language to be used for this extension. The
default setting is "Default" which is the selected voice prompt language
under web GUI->PBX->Internal Options->Language. The dropdown list
shows all the current available voice prompt languages on the UCM6510.
To add more languages in the list, please download voice prompt
package by selecting "Check Prompt List" under web GUI->PBX-
>Internal Options->Language.
Use NAT when the UCM6510 is on a public IP communicating with
devices hidden behind NAT (e.g., broadband router). If there is one-way
audio issue, usually it's related to NAT configuration or Firewall's support
of SIP and RTP ports. The default setting is enabled.
By default, the UCM6510 will route the media steams from SIP endpoints
through itself. If enabled, the PBX will attempt to negotiate with the
endpoints to route the media stream directly. It is not always possible for
the UCM6510 to negotiate endpoint-to-endpoint media routing. The
default setting is "No".
Select DTMF mode for the user to send DTMF. The default setting is
"RFC2833". If "Info" is selected, SIP INFO message will be used. If
"Inband" is selected, 64-kbit PCMU and PCMA are required. When "Auto"
is selected, RFC2833 will be used if offered, otherwise "Inband" will be
used.

Port: Allow peers matching by IP address without matching port
number.

Very: Allow peers matching by IP address without matching port
number. Also, authentication of incoming INVITE messages is not
required.

No: Normal IP-based peers matching and authentication of incoming
INVITE.
The default setting is "Port".
If enabled, empty SDP packet will be sent to the SIP server periodically to
keep the NAT port open. The default setting is "Yes".
UCM6510 IP PBX User Manual Page 65 of 229