Safety Compliances; Warranty - Grandstream Networks UCM6510 IP PBX User Manual

1. Connect one end of an RJ-45 Ethernet cable (cable type: straight through) into the WAN port of the
UCM6510; connect the other end into the uplink port of an Ethernet switch/hub.
2. Connect the 12V DC power adapter into the DC 12V power jack 1 on the back of the UCM6510.
Insert the main plug of the power adapter into a surge-protected power outlet. (Connect the second
power adapter into the DC 12V power jack 2 for failover purpose in case the first one is down).
3. Wait for the UCM6510 to boot up. The LCD in the front will show its hardware information when the
bootup process is done.
4. Once the UCM6510 is successfully connected to the network, the LED indicator for the WAN port in
the front will be in solid green and the LCD shows up the IP address.
Depending on how the UCM6510 is used, users can follow the steps below for optional setup:
1. PSTN Line Connection: connect PSTN lines from the wall jack to the UCM6510 LINE ports (FXO
ports).
2. Analog Line Connection: connect analog lines (phone and fax) to the PHONE ports (FXS ports).
3. T1/E1 Line Connection: connect one end of the T1/E1 cable provided from the service provider into
the T1/E1 port of the UCM6510; connect the other end into the T1/E1 wall jack.

SAFETY COMPLIANCES

The UCM6510 series IP PBX complies with FCC/CE and various safety standards. The UCM6510 power
adapter is compliant with the UL standard. Use the universal power adapter provided with the UCM6510
package only. The manufacturer's warranty does not cover damages to the device caused by
unsupported power adapters.

WARRANTY

If the UCM6510 series IP PBX was purchased from a reseller, please contact the company where the
device was purchased for replacement, repair or refund. If the device was purchased directly from
Grandstream Networks, contact our Technical Support Team for a RMA (Return Materials Authorization)
number before the product is returned. Grandstream Networks reserves the right to remedy warranty
policy without prior notification.
Warning:
Use the power adapter provided with the UCM6510 series IP PBX. Do not use a different power adapter
as this may damage the device. This type of damage is not covered under warranty.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
UCM6510 IP PBX User Manual Page 20 of 229